When installing “TERMOSHUBA” system walls and their surfaces shall be prepared for insulation. You shall also provide the compliance of work technique with normative documents.
Stage 1: Heat insulation
Applying of adhesive mixture
Warmth-keeping jacket gluing |
|
|
|
Adhesive mixture selection
|
|
Sarmalep T-KC, Sarmalep Ï-ÊÑ are used at temperatures higher than +5 °Ñ |
|
|
Sarmalep Ì-ÊÑ is used at temperatures -12°Ñ …+10°Ñ
|
|
|
Consumption rate of Sarmalep adhesive mixture per 1m2:
|
|
For TERMOSHUBA system with mineral wool .....................12 kg
|
|
|
For TERMOSHUBA system with SARMATERM polystyrene foam 10 kg
|
|
|
Instruments:
|
|
Stainless steel spatula with smooth and toothed edges |
|
|
Wire brushes for walls peeling |
|
|
Construction levels |
|
Heat-insulating layer shall be applied on a clean surface without any detached plaster, tile, color, grease stains, snow, aufeis, etc. The external layers of surface material shall not have any destructions. |
|
|
|
|
“Sarmalep” is a multipurpose adhesive mix. It is used for gluing warmth-keeping jacket made of both mineral wool and “Sarmaterm” polystyrene foam. |
|
Stage 2: Reinforcement
Dowel application
Reinforcement |
|
|
|
Dowels consumption rate L-120 per 1m2 :
|
|
For TERMOSHUBA system with mineral wool ......................8 pcs |
|
|
For TERMOSHUBA system with SARMATERM polystyrene foam...6 pcs |
|
|
Consumption rate of glass fibre net ÑÑØ-160 per 1m2:
|
|
For TERMOSHUBA system with mineral wool .................. 1,6 m 2
|
|
|
For TERMOSHUBA system with SARMATERM polystyrene foam 1,6 m 2
|
|
|
Instruments:
|
|
Knives or scissors for net cutting |
|
The reinforcement works shall not be done in the rain or strong wind. We recommend protecting surfaces from direct sunlight when gluing a reinforcing net and applying a decorative and protective layer. |
|
|
|
|
The type, length and location of protective components are given in project documentation depending on the thickness of a warmth-keeping jacket and construction and condition of a wall. |
|
Stage 3: Finishing
Plastering
Painting |
|
|
|
Façade paint consumption rate per 1m 2:
|
|
For TERMOSHUBA system with mineral wool ....................0,6 kg |
|
|
For TERMOSHUBA system with SARMATERM polystyrene foam 0,6 kg |
|
|
Instruments :
|
|
Stippling roller |
|
|
Plastering sets |
|
We do not recommend paints of saturated colors for painting “TERMOSHUBA” heat-insulating system in order to prevent high-temperature stresses on a surface of a decorative and protective layer. |
|
|
|
|
In order to get color surfaces of guaranteed quality it is necessary to cover the surface with facade paint after applying “Sarmalit” protective and finishing composition. |
|
|
Call us at (375 17) 212-00-56 or send your inquiries at
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
to get a free CD containing full information about “THERMOSHUBA” system.
You can ask a question to get more detailed information about “TERMOSHUBA” system. |
|
|
