|
More than 900 residential and commercial buildings in the Republic of Belarus were insulated with “TERMOSHUBA”™ technology.
“SARMATERM” trademark is the guarantee of high quality, longevity and reliability of a warmth-keeping jacket and “TERMOSHUBA” system on the whole.
“Sarmat” gives a unique opportunity to all construction firms, trade organizations and designers: call us at (375 17) 212-00-56 or send your inquiries at
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
to get a free CD containing full information about “TERMOSHUBA” system.
You can get detailed information about the use of the system for façade heat insulation and complete information on prices in the office of “Sarmat” company.
86/2 -115 Kazintsa Street,
Minsk, Belarus
Tel.: (+375 17) 278-52-02,
278-51-80, 212-48-55
Cell: (375 29) 673-84-23, 673-84-29.
|
Main characteristics of TERMOSHUBA™ system:
|
40% decrease of heat loss through the walls of a building |
|
Operating humidity – less than 1% |
|
Shock resistance – more than 7 kJ |
|
Interrepair life not less than 20 years |
|
Long life of the system (more than 35 years) when mounting and maintenance are done in a proper way |
“Sarmat” services:
|
|
Reconstruction and thermal modernization design of residential buildings of any complexity level |
|
Thermal modernization and façade finishing works with “TERMOSHUBA”™ method |
| Contact details: |
|
86/2 Kazintsa Street,
Minsk, Belarus
220108 |
|
Tel.:/Fax: (+375 17) 212-00-56
212-01-25
212-01-15 |
|
e-mail:
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
|
|
|
|
|
The warmth-keeping jackets used in “Termoshuba” system |
|
|
|
The following two types of warmth-keeping jackets are used in “Termoshuba” system:
|
“Sarmaterm” plates (manufactured by “Sarmat”, correspond to the ÏÏÒ-15Í ïî STB [National Standards System of the Republic of Belarus] 1437) are used as a polystyrene foam heat-insulating layer. |
|
FASROCK plates (manufactured by Rockwool) or rigid mineral wool plates of other manufacturers (corresponding to the M3-2000 of Construction Norms and Regulations 3.03.01 requirements) are used as a mineral wool heat-insulating layer. |
SARMATERM polystyrene foam
 |
|
|
|
SARMATERM polystyrene foam features:
|
|
Low heat conductivity |
|
Moisture resistance |
|
|
Structural stability |
|
Durability |
|
Light weight |
|
Deformation resistance |
|
 |
|
|
|
The advantages of polystyrene foam
|
|
The material possesses advanced technological properties due to its light weight and durability. |
|
|
Application recommendations:
|
|
“Termoshuba” system with polystyrene foam warmth-keeping jacket is more efficient while insulating dwelling houses and in personal housing development. |
|
Mineral wool
 |
|
|
|
Mineral wool characteristics:
|
|
Fire resistance |
|
Water repellence |
|
|
Sound absorption |
|
Deformation resistance |
|
 |
|
|
|
The advantages of mineral wool
|
|
Mineral wool is incombustible material. |
|
|
Application recommendations:
|
|
“Termoshuba” system with mineral wool warmth-keeping jacket is used for heat insulation of multistorey houses, public buildings of high danger level, buildings with high operational humidity, and buildings located at places with increased level of external noises. |
|
ÏÏÒ-15Í - technical specifications requirements for “Sarmaterm” polystyrene foam plates
| Name |
Value |
| Density kg/ì3, min |
15 |
| Compressive resistance at 100% deformation, MPa, min |
0,1 |
| Bending strength, MPa, min |
0,16 |
| Tensile strength, MPa, min |
0,1 |
| Heat conductivity at 250Ñ, Âò/(ì*Ê), max |
0,04 |
| Humidity, %, max |
1 |
| Heat conductivity in service conditions, Á Âò/(ì*Ê), max |
0,0438 |
| Moisture absorption during 24 hours, % out of volume, max |
1,5 |
THE USE OF POLYSTERENE FOAM IS THE MOST EFFICIENT WAY OF FAÇADE HEAT-INSULATION.
“TERMOSHUBA” SYSTEM WITH POLYSTERENE FOAM WARMTH-KEEPING JACKET IS PERMITTED TO BE USED IN MULTY STOREYED BUILDINGS (UP TO 12 STOREYS) IN MINSK AND REGIONAL CENTERS; IN OTHER CITIES - IN BUILDINGS UP TO 9 STOREYS. (LICENSE OF THE MINISTRY FOR EMERGENCY SITUATIONS DATED 26.04.2005)
|
SINCE 2005 “TERMOSCHUBA” IS THE FIRST AND SO FAR THE ONLY FAÇADE HEAT INSULATION TECHNOLOGY IN THE REPUBLIC OF BELARUS, WHICH ALLOWS USING “SARMATERM” POLYSTYRENE FOAM WARMTH-KEEPING JACKET WITHOUT MAKING MINERAL WOOL CROSSCUTS AROUND WINDOWS. “TERMOSHUBA” IS PRACTICALLY 100% HOME MANUFACTURED. |
|
In 2004 “Sarmat” launched the manufacture of effective heat insulating façade plates made of polystyrene foam for using it in “Termoshuba” insulating system along with mineral wool warmth-keeping jacket. “Sarmaterm” polystyrene foam plates have the same heat conductivity as mineral wool plates manufactured abroad.
|
Call us at (375 17) 212-00-56 or send your inquiries at
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
to get a free CD containing full information about “TERMOSHUBA” system.
You can ask a question. to get more detailed information about “TERMOSHUBA” system. |
|
|
|
|
