|
“THERMODAH” – heat-insulating and waterproofing roof system. |
|
|
“Sarmat” construction holding company presents its brand new heat-insulating and waterproofing roof system. “THERMODAH” can be successfully used for erection, modernization, repairs or reconstruction of buildings when laying soft roll out-of-operation roofs over load carrying solid-cast or prefabricated reinforced concrete slabs or heavy stone and reinforced masonry roof constructions.
|
“THERMODAH” is an end-to-end solution for heat insulating and waterproofing the roof systems that employs slab cellular polystyrene warmth-keeping jackets with one layer of roll material glued to one or both sides at plant conditions. |
|
“THERMODAH” System is a sandwich structure composed of the elements as follows:
 |
Leveling coat over prefabricated reinforced concrete or solid-cast slabs, heavy stone or reinforced masonry structures executed with “Thermolit” primer over prepared substrate layer for further vapor sealing application; |
|
Vapor sealing executed with roll materials over prime coated base; |
|
Heat-insulating and waterproofing layer executed with heat-insulating “Thermodah” roofing materials; |
|
Top layer of the waterproofing rug made of bituminous-polymer roll materials on polyester or glass base (when sandwich roofing is used). |
Advantages of “THERMODAH” system:
|
Easy and quick mounting that makes roofing job 50% easier; |
|
Absence of wet-mix processes during the roofing works; |
|
The possibility of system assembly at temperatures below zero; |
|
Light weight of the system due to both the absence of cement-sand screed coat and light weight of polystyrene foam; |
|
The possibility of the system installation over an old roof when the permissible lift slab load is not exceeded. |
Technical specifications of “THERMODAH” heat-insulating roofing system:
| Indicator Name |
Value |
| Cellular polystyrene grade (as per STB [National Standards System of the Republic of Belarus] 1437) |
ÏÏÒ 25 Í |
| Bonding strength of the roll and heat-insulating material, MPa, min |
0.1 |
| Bonding strength of the roll and heat-insulating material after water influence, MPa, min |
0.1 |
Bonding strength of the roll and heat-insulating material after temperature influence, MPa, min
-20°Ñ
+80°Ñ |
0.1
0.1 |
| Breaking load when pulling the roll material out from the heat-insulation, Í, min |
20 |
|
Sarmat construction holding company holds all necessary project and technical documentation on “THERMODAH” system. Call us at (+375 17) 212-01-25 and 212-01-15 or send us an inquiry to order detailed information on “Thermodah” system application or get answers to any questions you may have.
|
|
|
